Improved readability again
This commit is contained in:
parent
9fdb97fefc
commit
6c76f9a59e
|
@ -1,12 +1,12 @@
|
||||||
# Arduino Temperature SensorScript
|
# Arduino Temperature SensorScript
|
||||||
**Preparations**
|
**Preparations**
|
||||||
|
|
||||||
To start you will need either an ESP32S or an ESP8266 as these scripts are made with them in mind.
|
To start you will need either an ESP32S or an ESP8266 as these scripts are made with them in mind.<br/>
|
||||||
The temperature sensor used for these scripts is the DHT22
|
The temperature sensor used for these scripts is the DHT22
|
||||||
|
|
||||||
**Setup**
|
**Setup**
|
||||||
|
|
||||||
To upload the script to the ESP you will first need to follow these steps
|
To upload the script to the ESP you will first need to follow these steps:
|
||||||
|
|
||||||
1. Download Arduino IDE from Arduino's website https://www.arduino.cc/en/software (be sure to checkmark Install USB driver and Associate .ino files in setup installation), then plug in your board
|
1. Download Arduino IDE from Arduino's website https://www.arduino.cc/en/software (be sure to checkmark Install USB driver and Associate .ino files in setup installation), then plug in your board
|
||||||
2. Download the script fitting your board from this Git and open it in the IDE
|
2. Download the script fitting your board from this Git and open it in the IDE
|
||||||
|
@ -29,5 +29,6 @@ These scripts use pin 21 for ESP32 and pin D4 for ESP8266, feel free to change t
|
||||||
The DHT22 needs to be connected to either 3V3 or 5V, ground (G), and the serial pin stated above.
|
The DHT22 needs to be connected to either 3V3 or 5V, ground (G), and the serial pin stated above.
|
||||||
|
|
||||||
**Notes**
|
**Notes**
|
||||||
|
|
||||||
Once it connects to the wifi, the board should send a POST request upon startup.<br/>
|
Once it connects to the wifi, the board should send a POST request upon startup.<br/>
|
||||||
When connecting to wifi the built in LED will blink, when sending POST request it will flicker, and when it can't read the sensor it will be lit up
|
When connecting to wifi the built in LED will blink, when sending POST request it will flicker, and when it can't read the sensor it will be lit up
|
Loading…
Reference in New Issue